Product ID:BC-100 HARDENER COMPONENT
MSDS Date:08/10/1998
FSC:NIIN:Submitter:N EN
Status Code:A
Kit Part:Y
MSDS Number: CLDHH

AMERICAN SAFETY TECHNOLOGIES INC.

565 EAGLE ROCK AVE.
ROSELAND, NJ 07068
US

Emergency Phone: 800-424-9300

Info Phone: 973-403-2600

Preparer: J. HERMELE

Cage: 88444

AMERICAN SAFETY TECHNOLOGIES INC

ROSELAND, NJ 07068 US

Telephone: 973-403-2600

Cage: 88444

POLYETHYLENE POLYAMINE ADDUCT. (MFR CAS # 68951-85-9)

OSHA PEL N.E.

ACGIH TLV: N.E.

POLYAMIDE RESIN. (MFR CAS # 68410-23-1)

OSHA PEL N.E.

ACGIH TLV: N.E.

PROPYLENE GLYCOL MONOETHYL ETHER

CAS: 1569-02-4

RTECS: UB5250000

OSHA PEL N.E.

ACGIH TLV: N.E.

BISPHENOL A

CAS: 80-05-7

RTECS: SL6300000

OSHA PEL N.E.

ACGIH TLV: N.E.

DIETHYLENE TRIAMINE

CAS: 111-40-0

RTECS: IE1225000

OSHA PEL 1 PPM TWA

ACGIH TLV: 4.2 MG/M3;1 PPM TWA

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CAUSES BURNS. DAMAGE MAY BE
IRREVERSIBLE. SKIN: CAUSES IRRITATION AND BURNS. MAY CAUSE ALLERGIC
SKIN REACTION WHICH CAN BE SEVERE IN CERTAIN INDIVIDUALS. MAY BE
ABSORBED IN HARMFUL AMOUNTS. INHA LATION: MAY CAUSE ALLERGIC
RESPIRATORY REACTION, HEADACHES, DIZZINESS AND NAUSEA. INGESTION:
NO SPECIFIC INFORMATION AVAILABLE. CONTAINS MATERIALS THAT MAY BE
TOXIC.
Explanation of Carcinogenicity:NOT ON NTP, IARC OR OSHA LISTS.
Effects of Overexposure:OVEREXPOSURE EFFECTS: IRRITATION, SENSITIZATION
AND DERMATITIS.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA AND OTHER SKIN
CONDITIONS.

First Aid:EYES: FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST 15
MINUTES. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING
AND WASH CONTACT AREA WITH MILD SOAP AND WATER. GET MEDICAL
ATTENTION. INH ALATION: REMOVE TO FRESH AIR. IF SYMPTOMS PERSIST,
CONSULT PHYSICIAN. INGESTION: DO NOT INDUCE VOMITING. IF
CONSCIOUS, GIVE LARGE QUANTITIES OF MILK OR WATER TO DILUTE. GET
MEDICAL ATTENTION.

Flash Point Method:SCC
Flash Point:>42.2C, 108.F
Lower Limits:N.E.
Upper Limits:N.E.
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL OR WATER SPRAY.
Fire Fighting Procedures:REMOVE ALL SOURCES OF IGNITION. WEAR
NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS AND COMPLETE
PERSONAL PROTECTIVE EQUIPMENT WHERE POTENTIAL FOR EXPOSURE TO
VAPORS OF PRODUCTS OF COMBUSTION EXIST S.
Unusual Fire/Explosion Hazard:CONTAINERS MAY RUPTURE (DUE TO BUILD-UP
OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT. DECOMPOSITION AND
COMBUSTION PRODUCTS MAY BE TOXIC.

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. DIKE
SPILL. ABSORB WITH INERT MATERIAL AND COLLECT FOR DISPOSAL. FLUSH
AREA WITH WATER; PREVENT WASHINGS FROM ENTERING WATERWAYS.

Handling and Storage Precautions:AVOID ALL PERSONAL CONTACT. DO NOT
EXCEED 110F/43C IN STORAGE AREA. GROUND AND BOND METAL CONTAINERS
FOR LIQUID TRANSFER TO AVOID STATIC SPARKS.
Other Precautions:A SAFETY SHOWER AND EYE WASH FACILITY SHOULD BE
AVAILABLE TO EMPLOYEES. IMMEDIATELY REMOVE AND THOROUGHLY LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.

Respiratory Protection:NIOSH-APPROVED RESPIRATOR WITH ORGANIC VAPOR
CARTRIDGE IF REQUIRED.
Ventilation:EXPLOSION-PROOF MECHANICAL VENTILATION AND LOCAL EXHAUST
RECOMMENDED. MECHANICAL EXHAUST IS NOT RECOMMENDED AS SOLE MEANS OF
CONTROLLING EMPLOYEE EXPOSURE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI-APPROVED CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:EYEWASH STATION AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . IN OPERATIONS WHERE CONTACT MAY OCCUR,
COVERALLS, APRON AND IMPERVIOUS FOOT COVERINGS ARE RECOMMENDED.
Work Hygienic Practices:IMMEDIATELY REMOVE AND LAUNDER CONTAMINATED
CLOTHING BEFORE REUSE.
Supplemental Safety and Health

Boiling Pt:>126.7C, 260.F
B.P. Text:>260F/127C
Melt/Freeze Pt:M.P/F.P Text:N.A.
Vapor Pres:<2.0 MMHG @68F/20C.
Vapor Density:N.A.
Spec Gravity:0.94
Evaporation Rate & Reference:<1.0 (BUTYL ACETATE=1)
Solubility in Water:PARTIALLY SOLUBLE
Appearance and Odor:CLEAR AMBER LIQUID; AMINE ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Toxicological Information:NOT ON NTP, IARC OR OSHA LISTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Transport Information:D.O.T. SHIPPING CLASSIFICATION (49 CFR 172.101):
PAINT, 8, UN3066, III.

SARA Title III Information:SECTION 313 SUPPLIER INFORMATION: THE
PRODUCT CONTAINS THE FOLLOWING TOXIC CHEMICALS SUBJECT TO THE
REPORTING REQUIREMENTS OF SECTION 313 OF THE EMERGENCY PLANNING AND
COMMUNITY RIGHT-TO-KNOW ACT OF 1 986 AND 40 CFR 372. THIS
INFORMATION MUST BE INCLUDED ON THE MSDS COPIED & DISTRIBUTED FOR
THIS MATERIAL: CHEMICAL NAME: BISPHENOL-A. CAS NUMBER: 80-05-7.
WEIGHT %: <3.0%.